GENERAL CASTING, Epoxy Resin, price per kit

  • US$69.00

GENERAL CASTING ... suitable for most casting purpose, from small object like coin (harden within 12 hours) to large batch like river table (multi-layer-pour) ... also perfect solution for Surface Coating

Epoxy Resin, GENERAL CASTING, is a two-component resin system. Designed to general casting and see through objects, also perfect for large surface coating

Crystal clear, high see through, yellow resistance
Thin liquid easy to handle, no bubble, self-Leveling
Reasonable set-to-touch and cure time
Excellent color stability with pigments
No toxic, 100% solids, low VOC, low odor

Resin: Bisphenol A Resin
Hardener: Polyetheramine


  1. EYES: Flush with copious amounts of water lifting lids and removing contact lenses to ensure complete irrigation. Get medical attention.
  2. SKIN: Flush with water and then wash with soap and water, launder contaminated clothing before reuse. Get medical attention if irritation persists.
  3. INHALATION: Remove to fresh air and assist breathing as necessary. Get Medical attention.
  4. INGESTION: If appreciable amounts have been swallowed, get medical attention.


  1. Make sure wear safety glasses during mixing and pour of resin
  2. Mix 3 parts A with 1 part B by weight (Or 2.7 : 1 by volume) into cleaned mixing container. Fully mix with a paddle, carefully scrape the wall and bottom of container, ensuring no streaks.
  3. For best results, be used at temperature 70 to 80 degrees F, in room clean, dry and dust free. The relative humidity should not be more than 85%.
  4. POT LIFE: 30 Minutes (100 ml at 77 degrees F). SET TO TOUCH: 8 hours. CURE TIME: 24 hours depending on ambient temperature, humidity and thickness
POUR THICK: The chemical reaction between resin and hardener will generate heat. For larger volume batches, the uncontrolled heat build-up, can foam, smoke and burn, the high temperature can melt its plastic container. If you mix larger batches of resin and hardener, for example pour river table top
  1. Pour the epoxy in multiple batches/layers, Maximum 1/2” thick per layer
  2. At least 5 hours between pour of different layers
  3. Mix suitable amount, and pour the mixture within 15 minutes 
  4. Work at cooler temperatures. Cooler shop temperatures and cooling the epoxy itself will both work in slowing cure and controlling epoxy’s exothermic reaction


Recommended 55 degrees F. to 85 degrees F., with tightly sealed lids, avoid from direct sunlight

Shopify secure badge